Name: Adjustable Roof Riser Bracket for Pergola Beams | 180° Angle Mount
SKU: EXT-310b25761358-1
Price: 84.99 USD
Availability: InStock

Adjustable Roof Riser Bracket for Pergola Beams | 180° Angle Mount

$84.99 USD

Color

Black

Qty

Buy 1 Buy 2 – Best Value

Christmas-ready patio projects

Bring a Level Beam to a Sloped Roofline

This adjustable black steel riser gives pergola, patio-cover and shed beams a purpose-built seat above a pitched roof. Set the angle, check the level, lock it down and place the beam in the U-shaped saddle.

Built around the job

One Mount. Four Practical Advantages.

The supplied installation video centers on the step that matters most: dialing the upright post into position before the beam goes in.

Adjust to the Roof Pitch

The curved pivot slots let the riser move through a broad angle range before the locking bolts are tightened.

Level Before the Beam Arrives

Hold a spirit level against the riser, make the correction, then lock the two-bolt pivot in place.

Seat the Beam in a U-Saddle

Two upright side plates cradle the wood beam and provide multiple fastening points.

Start With the Hardware Shown

The package includes one black bracket and six matching installation screws.

See the key adjustment

Level, Lock, Then Set the Beam

The installation clip shows the real sequence on a shingle roof, with the bracket adjusted upright before the timber is placed.

1Fasten the base at the planned support point.

2Use a level while adjusting the pivot angle.

3Tighten the two lock bolts and seat the beam.

Installer leveling and locking an adjustable roof riser bracket on a shingle roof

BeforeHolding a straight beam directly over a sloped roof creates an awkward, uneven support point.

AfterThe adjusted riser creates a level U-shaped seat ready to receive the beam.

Your Practical WinAlignment becomes easier to see and set before final beam fastening.

Before and after comparison showing a beam aligned with the adjustable roof riser bracket

Where it earns its place

Four Projects, Four Different Needs

From holiday entertaining to a weekend build, the same adjustable support logic fits several real outdoor structures.

Christmas patio pergola beam supported by an adjustable roof bracket

Christmas Patio Gathering

Raise the supporting beam above the roofline while keeping the festive entertaining space open and inviting.

Homeowner leveling the roof riser bracket during winter installation

Winter Morning Setup

Check the upright post in clear daylight, adjust the angle and lock it before the timber arrives.

Two people measuring a shed canopy beam on adjustable roof riser brackets

Backyard Shed Extension

Create a level beam line over a pitched shed roof while two people measure and position the framing.

Close view of a black adjustable bracket under a wood patio beam

Weekend Patio Upgrade

Use the visible pivot and U-saddle to plan a straightforward beam-support point for a porch or patio cover.

Verified from the supplied product

The Details You Need Before Installation

Product specifications

Overall height	Approx. 6 in
Inside saddle width	Approx. 3.55 in
Angle adjustment	Up to 180°
Material	Carbon steel
Color	Black

Adjustable roof riser bracket dimension reference showing approximately 6 in height and 3.55 in inside saddle width — Size reference: approximately 6 in high with a 3.55 in inside saddle width.

Package contents

1 adjustable roof riser bracket
6 matching installation screws

Before you start

Confirm the beam fits the saddle and verify the roof structure, fastening plan and weatherproofing method for your project. Installation requirements vary by roof and building.

White-background package reference showing one black roof riser bracket and six installation screws — Package reference: one black bracket and six matching screws.

Visual answers

Questions That Are Easier to See

These close-up views explain the installation sequence, fit and included pieces without turning the page into a technical manual.

How does the base attach?

The flat feet sit on the planned roof support point and accept the supplied screws. Choose the fastening and weatherproofing method appropriate for your roof structure.

Installer driving a screw through the flat foot of the roof riser bracket

What beam space does the top saddle provide?

The inside saddle width is approximately 3.55 in. This close-up shows a wood beam seated inside the U-shaped saddle so you can judge the fit; measure your beam before ordering.

Candid close-up of a wood beam seated in the roof riser bracket with a 3.55 in inside-width marker

What is included in the package?

The package includes one black adjustable roof riser bracket and six matching installation screws. This casual workbench view keeps every included piece visible; beams, tools and holiday décor are not included.

Casual handheld workbench photo of one black adjustable roof riser bracket and six installation screws

Can I set the post upright on a pitched roof?

That is the central purpose of the pivot. Loosen the lock bolts, use a level to position the riser, then tighten both bolts securely.

Is this a universal structural solution?

No single bracket is universal. Confirm beam fit, roof condition, local requirements and the appropriate installation method before use.

Build the gathering place

Set the Roofline Now. Enjoy the Patio All Season.

A clear adjustment sequence, a secure beam saddle and a compact black profile make this bracket a practical starting point for your next pergola, porch or shed-cover project.